Precise control of drug and fluid delivery to the millilitre per hour, with alarm systems that help prevent over-infusion.
Choose by the type of therapy — from large-volume fluids through to drugs that must be injected in very small volumes.
An intravenous infusion pump for 100–1000 mL bags or bottles of fluid.
A syringe pump for 10–60 mL syringes, suited to drugs that must be given in small volumes.
A dual-channel syringe pump for drugs that must be given simultaneously, or for changing a syringe without interrupting delivery.
A patient-controlled analgesia pump for post-operative use, with a cumulative dose limit.
Choose according to the tier of the facility and the patient profile it handles; our sales team can advise on the basis of actual use.
The AS-IP100 and AS-SP200 are used together for fluid therapy and for drugs that require continuous rate control.
Use small syringes at low flow rates, with alarms sensitive to occlusion.
The AS-SP200 is used for chemotherapy that requires strict control of rate and volume.
The AS-PC10 lets patients control delivery within limits set by the physician.
Each model has its own table. The values shown are those declared by the manufacturer in the model datasheet, not independent test results — please confirm the values your clinical use depends on in the quotation before ordering.
| Type | Intravenous infusion pump |
|---|---|
| Flow rate | 0.1 – 1200 mL/h, adjustable in 0.1 mL/h steps |
| Accuracy | ±5 % when used per the manual with a suitable administration set |
| Protection | Air bubble detection, high/low occlusion pressure, door open |
| Modes | Continuous, Bolus, Time-based |
| Battery | Approximately 5 hours of continuous use |
| Type | Single-channel syringe pump |
|---|---|
| Flow rate | 0.1 – 1500 mL/h |
| Syringe sizes supported | 5 / 10 / 20 / 30 / 50 / 60 mL |
| Accuracy | ±3 % when used per the manual |
| Protection | Three-level occlusion pressure, syringe displacement detection |
| Battery | Approximately 6 hours of continuous use |
| Type | Dual-channel syringe pump |
|---|---|
| Flow rate | 0.1 – 1500 mL/h per channel |
| Syringe sizes supported | 5 / 10 / 20 / 30 / 50 / 60 mL |
| Combined modes | Channels can run simultaneously or staggered |
| Protection | Three-level occlusion pressure, independently per channel |
| Battery | Approximately 6 hours of continuous use |
| Type | Patient-controlled analgesia (PCA) pump |
|---|---|
| Basal flow rate | 0.1 – 100 mL/h |
| Bolus size | 0.1 – 50 mL, adjustable |
| Lockout interval | 1 – 999 minutes |
| Recording | Log of every demand and the cumulative volume delivered |
| Protection | Access code for configuration, alarm at the limit |
Answers are based on the instructions for use and datasheets of the models listed on this page. For anything concerning neonatal patients or consumable replacement intervals, please confirm against the manual supplied with the device and the judgement of the treating physician.
Tell us the unit quantity, destination country and preferred payment terms. We will reply with a quotation and the document list within one business day.