Emergency equipment procurement: S8 and EV3 have different roles
S8 and EV3 should not be treated as interchangeable emergency devices. S8 is a defibrillator monitor whose source describes manual defibrillation, pacing, monitoring and AED modes. EV3 is a transport/emergency ventilator. Match each procurement task to its model, intended patient group, accessories and documents.
Equipment task
| Model | Equipment task | What the source establishes | What to confirm |
|---|---|---|---|
| S8 | Defibrillator monitor | Source states 1–360 J and 20–250 Ω; supplied CN23/00001577 lists S8 on page 4 | Therapy and monitoring accessories, options and the applicable additional technical-assessment documents |
| EV3 | Emergency/transport ventilator | Supplied FI23/1008002 page 6 lists EV3/EV3A with an adult/paediatric ≥10 kg scope statement | Exact variant, IFU patient-group limits, gas/power and transport accessories |
How to compare the proposed equipment
Separate the tasks
Write separate requirement lines for defibrillation/monitoring and ventilation. A shared emergency department category does not make a device a substitute for equipment with another purpose. This guide does not prescribe energy, ventilation or treatment settings.
Read the patient-group condition in context
The ≥10 kg statement comes from the supplied EV3/EV3A certificate schedule. Check the actual certificate issue and the model-specific IFU together. Do not extend that statement to every emergency model or accessory.
Check the complete document chain
For S8, a Class III quality-system schedule entry does not by itself satisfy every technical-assessment requirement. Request the declaration, IFU and applicable assessment documents for the proposed configuration and destination.
What should the acceptance file contain?
- Match the exact model, software and delivered accessories.
- Confirm patient-group and accessory limits in the IFU.
- Have the responsible team define functional and electrical checks using suitable test equipment.
- Check agreed power, battery, charging and transport arrangements.
- Collect training, consumable and service documents.
Questions before requesting a quotation
Where does the EV3 ≥10 kg statement come from?
The supplied FI23/1008002 schedule, page 6, in the EV3/EV3A entry. It must be read with the issue and IFU.
Can the listed S8 energy range be used as a treatment instruction?
No. It is a manufacturer-stated device capability, not patient-specific guidance.
Manufacturer sources and document references
Scope of this guide
This is a document-based procurement guide. It reports manufacturer statements and supplied certificate references, distinguishes options and unknowns, and does not report independent product testing or provide patient-specific treatment settings.